| CENTER SECTION HEIGHT | 0.667 INCHES MINIMUM AND 0.699 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| FABRICATION METHOD | MACHINED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG CORNER RADIUS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.590 INCHES MINIMUM AND 2.610 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.230 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |