| CENTER SECTION HEIGHT | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.390 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.630 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.966 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.190 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.780 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG END WIDTH | 2.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 3.480 INCHES MINIMUM AND 3.520 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | OXIDE |