| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | END RADIUS AND TAPERED |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.925 INCHES MINIMUM AND 0.965 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.107 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.120 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| SECOND LEG CORNER RADIUS | 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.630 INCHES MINIMUM AND 2.690 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.150 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE 0.945 TO 0.955 IN. DIA. HOLE WITH THREE EQUALLY SPACED SLOTS 0.110 TO 0.130 IN. WIDE CENTRALLY LOCATED BETWEEN MTG HOLES IN SECOND END |
| STYLE DESIGNATOR | ANGLE |