| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.225 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.422 INCHES MINIMUM AND 2.453 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| SECOND LEG CORNER RADIUS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.797 INCHES MINIMUM AND 1.828 INCHES MAXIMUM |
| SPECIAL FEATURES | FURNISHED WITH ONE NUT AND TWO RIVETS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ANODIZE |