|
|
|
National Stock Number:
5340-00-768-0600
Federal Supply Class:
5340
National Item Identification Number:
007680600
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 1018990-002 | 05037 | ANACOMP, INC. | | M24066/2-302 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-302 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-24066/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17160-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | HOLE DIAMETER | 0.068 INCHES MINIMUM AND | | 0.074 INCHES MAXIMUM | | WIDTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | OVERALL HEIGHT | 0.250 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.009 INCHES MINIMUM AND | | 0.015 INCHES MAXIMUM | | LENGTH | 0.200 INCHES MINIMUM AND | | 0.240 INCHES MAXIMUM | | DISTANCE FROM LOOP CENTER TO END | 0.132 INCHES MINIMUM | | LOOP/HOLDING DIMENSION | 0.195 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE |
|
|