| CENTER SECTION HEIGHT | 1.378 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.000 INCHES NOMINAL |
| FABRICATION METHOD | STAMPED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG OFFSET ANGLE | 30.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.128 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.000 INCHES NOMINAL |
| MATERIAL | STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG ANGLE | 30.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.190 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.000 INCHES NOMINAL |
| SPECIAL FEATURES | ONE HOLE IN CENTER OF BRACKET 1.500 IN. DIA |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT | ENAMEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |