|
|
|
National Stock Number:
5340-00-413-3417
Federal Supply Class:
5340
National Item Identification Number:
004133417
Description:
CLEVIS,ROD END
Detail:
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
|
Manufacturer Information:
| A51F11514-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51F11514-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51F11514-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END | 1.000 INCHES NOMINAL | | DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 2.530 INCHES NOMINAL | | FORK ARM THICKNESS | 0.125 INCHES NOMINAL | | FORK DEPTH | 0.250 INCHES NOMINAL | | FORK SPAN WIDTH | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HOLE DIAMETER | 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | METALLIC HARDNESS RATING | 27.0 MINIMUM ROCKWELL C AND 32.0 MAXIMUM ROCKWELL C | | NOMINAL THREAD SIZE | 0.250 INCHES ROD CONNECTION | | OVERALL HEIGHT | 0.500 INCHES NOMINAL | | OVERALL WIDTH | 0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | SHANK DIAMETER | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHANK LENGTH | 2.500 INCHES NOMINAL | | SPECIAL FEATURES | PRONG HAS TWO PIVOT HOLES LOCATED 0.625 IN.,APART,HOLES IN ONE PRONG ONLY | | STYLE DESIGNATOR | CLEVIS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A ROD CONNECTION | | THREAD DIRECTION | RIGHT-HAND ROD CONNECTION | | THREAD LENGTH | 1.250 INCHES NOMINAL ROD CONNECTION | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION |
|
|