|
|
|
National Stock Number:
5340-00-411-0840
Federal Supply Class:
5340
National Item Identification Number:
004110840
Description:
CLEVIS,ROD END
Detail:
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
|
Manufacturer Information:
| 514704-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| ANGLE HEIGHT | 1.500 INCHES NOMINAL | | ANGLE | 45.0 DEGREES NOMINAL | | DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END | 1.250 INCHES NOMINAL | | DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 7.740 INCHES MINIMUM AND 7.750 INCHES MAXIMUM | | FORK SPAN WIDTH | 2.750 INCHES MINIMUM AND 2.755 INCHES MAXIMUM | | FORK ARM THICKNESS | 1.375 INCHES NOMINAL | | FORK DEPTH | 3.990 INCHES MINIMUM AND 4.000 INCHES MAXIMUM | | HOLE DIAMETER | 2.000 INCHES MINIMUM AND 2.002 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 2.500 INCHES ROD CONNECTION | | OVERALL HEIGHT | 5.500 INCHES NOMINAL | | OVERALL WIDTH | 5.500 INCHES NOMINAL | | SECURING PIN HOLE DIAMETER | 0.250 INCHES NOMINAL | | STYLE DESIGNATOR | CLEVIS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MPR1201-14,HAVAL AIR ENGINEERING CENTER MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3B ROD CONNECTION | | THREAD DIRECTION | RIGHT-HAND ROD CONNECTION | | THREAD LENGTH | 3.750 INCHES NOMINAL ROD CONNECTION | | THREAD QUANTITY PER INCH | 12 ROD END | | THREAD SERIES DESIGNATOR | UN ROD CONNECTION | | SPECIAL FEATURES | THD HOLE 1/4-20 UNC-3B BY 0.500 IN D CENTERED 1.000 IN FROM ENDS ON OUTSIDE OF BOTH TINES |
|
|