| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG THICKNESS | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7075 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE 8-32 UNC-2B THREADED HOLE LONGITUDINALLY THROUGH FIRST LEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |