| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.040 INCHES MINIMUM AND 1.100 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 TEMP 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |