|
|
|
National Stock Number:
5340-00-400-3523
Federal Supply Class:
5340
National Item Identification Number:
004003523
Description:
CATCH,CLAMPING
Detail:
A positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
|
Manufacturer Information:
| 10225358 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13029941 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 535417-9 | 96214 | RAYTHEON COMPANY | | 5340004003523 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 457-5682 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5340004003523 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | SCB83314-42SS | 1RRL5 | NIELSEN HARDWARE CORPORATION | | SCB83314-42SS | 98003 | NIELSEN HARDWARE CORP | | C-B-83314-42-SS | 98003 | NIELSEN HARDWARE CORP | | SC-B-83314-42SS | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CATCH STRIKE STYLE | MORTISE | | DESIGN TYPE | LOOP ENGAGING | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE DIAMETER | 0.140 INCHES MINIMUM AND 0.144 INCHES MAXIMUM | | HOLE QUANTITY | 2 | | OPERATION METHOD | LEVER | | OVERALL HEIGHT | 0.594 INCHES NOMINAL | | OVERALL LENGTH | 0.625 INCHES NOMINAL | | OVERALL WIDTH | 1.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE CATCH | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE STRIKE | | MATERIAL THICKNESS | 0.062 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 CATCH | | MATERIAL | STEEL COMP 302 STRIKE | | MATERIAL | STEEL COMP 416 YOKE | | WIDTH | 0.625 INCHES NOMINAL | | STYLE DESIGNATOR | LEVER | | SURFACE HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | SURFACE HOLE QUANTITY | 2 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TONGUE WIDTH | 0.500 INCHES NOMINAL |
|
|