|
|
|
National Stock Number:
5340-00-050-3081
Federal Supply Class:
5340
National Item Identification Number:
000503081
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| ANSI A156.1 A8173 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | ANSI A156.1 A8333 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | BHMA-A156.1 | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | BHMA-A156.1 A8173 3IN | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | FF-H-116E TYPE 2171H | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FFH116CTYPE2171H | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 5 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | BRASS PIN AND | | STEEL, WROUGHT BODY | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | ZINC COATED-HOT DIPPED, FF-H-116, US2H OVERALL | | MATERIAL THICKNESS | 0.092 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.169 INCHES NOMINAL | | BODY WIDTH | 3.000 INCHES NOMINAL | | PIN CENTER TO BODY EDGE DISTANCE | 1.500 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | BALL BEARING | | MOUNTING HOLE QUANTITY | 6 |
|
|