5330-99-245-1064, GASKET

1560-99-245-0946 BRACKET,STRUCTURAL COMPONENT,AIR

National Stock Number:
5330-99-245-1064

Federal Supply Class:
5330

National Item Identification Number:
992451064

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

300-513	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
D/300-513R/1	63743	WARD LEONARD CT LLC
D300-513	63743	WARD LEONARD CT LLC
D300-513	U0480	MAWDSLEYS LTD
D/300-513R/1	U0480	MAWDSLEYS LTD

Techincal Specification:

APERTURE LENGTH	48.00 MILLIMETERS MINIMUM AND 52.00 MILLIMETERS MAXIMUM
APERTURE WIDTH	33.00 MILLIMETERS MINIMUM AND 37.00 MILLIMETERS MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	63.00 MILLIMETERS MINIMUM AND 67.00 MILLIMETERS MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	127.00 MILLIMETERS MINIMUM AND 133.00 MILLIMETERS MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	1.60 MILLIMETERS NOMINAL
HARDNESS RATING	56.0 INTERNATIONAL RUBBER HARDNESS DEGREE SCALE MINIMUM AND 65.0 INTERNATIONAL RUBBER HARDNESS DEGREE SCALE MAXIMUM
HOLE DIAMETER	7.00 MILLIMETERS NOMINAL
INSIDE CORNER RADIUS	3.00 MILLIMETERS NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	BS 2751 COMPOUND BA60 NATIONAL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	RUBBER
OUTSIDE CORNER RADIUS	3.00 MILLIMETERS NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	9.00 MILLIMETERS MINIMUM AND 11.00 MILLIMETERS MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	9.00 MILLIMETERS MINIMUM AND 11.00 MILLIMETERS MAXIMUM
OVERALL LENGTH	147.00 MILLIMETERS MINIMUM AND 153.00 MILLIMETERS MAXIMUM
OVERALL WIDTH	83.00 MILLIMETERS MINIMUM AND 87.00 MILLIMETERS MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial