|
|
|
National Stock Number:
5330-01-593-6743
Federal Supply Class:
5330
National Item Identification Number:
015936743
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| BACG10AD24D | 1K407 | 4 M CO INC | | BACG10AD24D | 77969 | RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. | | BACG10AD24D | 81205 | THE BOEING COMPANY | | BACG10AD24D | 83259 | PARKER-HANNIFIN CORPORATION | | BACG10AD24D | SW461 | HUTCHINSON SEAL DE MEXICO STILLMAN SEAL DIVISION | | BACG10AD24D | Z0HA9 | BOEING DEFENCE AUSTRALIA | | D020157-24 | 83259 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.44 INCHES MINIMUM AND 1.46 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.83 INCHES MINIMUM AND 1.85 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.261 INCHES MINIMUM AND 0.276 INCHES MAXIMUM ALL HOLES | | MATERIAL DOCUMENT AND CLASSIFICATION | 1/4 OR 1/2 HARD CRES IAW AMS5517,5903,5910,5518,5904 OR 5911 NATIONAL SPEC SINGLE MATERIAL RESPONSE RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | C-408-7(PARKER);TH1020(STILLMAN);K-1046(RUBBER TECK);1166-60(RAINIER) MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT | | MATERIAL | RUBBER NEOPRENE OR RUBBER CHLOROPRENE CLASS CR SEALING ELEMENT | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 RETAINER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GASKET,SEAL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.27 INCHES MINIMUM AND 0.29 INCHES MAXIMUM | | OVERALL WIDTH | 2.557 INCHES MINIMUM AND 2.567 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 1.125 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81205-BACG10AD MANUFACTURERS STANDARD | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|