5330-01-443-8762, GASKET

4730-01-443-8761 STRAINER ELEMENT,SEDIMENT

National Stock Number:
5330-01-443-8762

Federal Supply Class:
5330

National Item Identification Number:
014438762

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

32-1967	27192	DRS NAVAL POWER SYSTEMS INC
LL-HX0-4767	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
PO0165NRP	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
LO-014438762	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)

Techincal Specification:

APERTURE LENGTH	5.000 INCHES MINIMUM AND 5.030 INCHES MAXIMUM
APERTURE WIDTH	2.210 INCHES MINIMUM AND 2.290 INCHES MAXIMUM
BOLT HOLE QUANTITY	14
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.125 INCHES NOMINAL FIFTEENTH HOLE
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.438 INCHES NOMINAL FIFTEENTH HOLE
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.032 INCHES NOMINAL
HARDNESS RATING	45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.247 INCHES MINIMUM AND 0.256 INCHES MAXIMUM FIFTEENTH HOLE
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.312 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.312 INCHES NOMINAL
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.580 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.620 INCHES NOMINAL
OVERALL LENGTH	5.134 INCHES MINIMUM AND 5.154 INCHES MAXIMUM
OVERALL WIDTH	3.460 INCHES MINIMUM AND 3.540 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D2000 TY FC GE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SILICONE CLASS Q OVERALL
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
STYLE DESIGNATOR	NON-CIRCULAR
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial