5330-01-376-2949, GASKET

5330-01-376-2950 SEAL,NONMETALLIC SPECIAL SHAPED

National Stock Number:
5330-01-376-2949

Federal Supply Class:
5330

National Item Identification Number:
013762949

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

9155466-01

98747

OGDEN AIR LOGISTICS CENTER

Techincal Specification:

APERTURE LENGTH	4.970 INCHES MINIMUM AND 5.030 INCHES MAXIMUM
APERTURE WIDTH	2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	3.080 INCHES MINIMUM AND 3.100 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	4.990 INCHES MINIMUM AND 5.010 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HARDNESS RATING	30.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM
OVERALL WIDTH	3.470 INCHES MINIMUM AND 3.530 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-6855/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER NEOPRENE OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial