5330-01-374-0643, GASKET

4520-01-374-0632 HEATER,DUCT TYPE,STATIONARY

5999-01-374-0645 SHIELDING GASKET,ELECTRONIC

National Stock Number:
5330-01-374-0643

Federal Supply Class:
5330

National Item Identification Number:
013740643

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

9155465-01

98747

OGDEN AIR LOGISTICS CENTER

Techincal Specification:

APERTURE LENGTH	4.280 INCHES MINIMUM AND 4.340 INCHES MAXIMUM
APERTURE WIDTH	2.530 INCHES MINIMUM AND 2.590 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	3.054 INCHES MINIMUM AND 3.074 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	4.302 INCHES MINIMUM AND 4.322 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.062 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
HARDNESS RATING	30.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.489 INCHES MINIMUM AND 0.509 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.238 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	5.280 INCHES MINIMUM AND 5.340 INCHES MAXIMUM
OVERALL WIDTH	3.530 INCHES MINIMUM AND 3.590 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-6855/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER NEOPRENE OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial