|
|
|
National Stock Number:
5330-01-348-6170
Federal Supply Class:
5330
National Item Identification Number:
013486170
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 1508M13 | 07482 | GENERAL ELECTRIC COMPANY | | 1508M13-28 | 07482 | GENERAL ELECTRIC COMPANY | | 1508M13P128 | 07482 | GENERAL ELECTRIC COMPANY | | 908119-8 | 83259 | PARKER-HANNIFIN CORPORATION | | 1508M13P128 | 95272 | STILLMAN SEAL CORPORATION |
|
Techincal Specification:
| ELONGATION PERCENTAGE | 120 MAXIMUM | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5515 ASSN STD SINGLE MATERIAL RESPONSE RETAINER | | HARDNESS RATING | 75.0 SHORE DUROMETER A NOMINAL OVERALL | | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER | | CROSS-SECTIONAL THICKNESS | 0.157 INCHES NOMINAL | | GAGE RING THICKNESS | 0.100 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR | | HOLE DIAMETER | 0.261 INCHES MINIMUM AND | | 0.276 INCHES MAXIMUM | | OVERALL LENGTH | 2.632 INCHES MINIMUM AND | | 2.672 INCHES MAXIMUM | | OVERALL WIDTH | 2.632 INCHES MINIMUM AND | | 2.672 INCHES MAXIMUM | | APERTURE DIAMETER | 1.612 INCHES MINIMUM AND | | 1.632 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.280 INCHES MINIMUM AND | | 0.350 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | SPECIAL FEATURES | SEALS BONDED TO EACH SIDE OF CEN-TER HOLE;MADE FROM SYNTHETIC RUBBER PER MIL-R-83485,TYPE 1 | | SPECIAL TEST FEATURES | NO LEAKS PERMITTED DURING 16000 PRESSURE CYCLES BETWEEN 100 PSI TO 1400 PSI USING JP-4 WITH ELASTOMER AT 200 DEG F +/- 25 DEG F AND A 0.010 +/- 0.0005 GAP BETWEEN THE FLANGE AND RETAINER | | CRITICALITY CODE JUSTIFICATION | SPCL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 07482 | | MFR SOURCE CONTROLLING REFERENCE | 1508M13-28 |
|
|