|
|
|
National Stock Number:
5330-01-317-0098
Federal Supply Class:
5330
National Item Identification Number:
013170098
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| SM-C-915790 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149,TY 1,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR | | HOLE DIAMETER | 0.159 INCHES NOMINAL | | OVERALL LENGTH | 1.480 INCHES NOMINAL | | OVERALL WIDTH | 1.200 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.100 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | APERTURE WIDTH | 0.420 INCHES NOMINAL | | APERTURE LENGTH | 0.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.875 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.890 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.302 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.150 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | SPECIAL FEATURES | 2BOLT HOLES ALONG WIDTH 0.136 IN. DIA; MUST MEET FUNGUS RESISTANCE REQUIREMENT NUMBER 4 OF MIL-STD-454 |
|
|