|
|
|
National Stock Number:
5330-01-122-8530
Federal Supply Class:
5330
National Item Identification Number:
011228530
Description:
SEAL,NONMETALLIC SPECIAL SHAPED
Detail:
An item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION.
|
Manufacturer Information:
| 107854 | 01359 | TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. | | FS97101-0903 | 77969 | RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. |
|
Techincal Specification:
| CONSTRUCTION | SOLIDSOLID | | CROSS SECTION INSIDE DIAMETER | 0.249 INCHES NOMINAL0.249 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | HOLLOW BULBHOLLOW BULB | | CROSS-SECTIONAL THICKNESS | 0.032 INCHES NOMINAL0.032 INCHES NOMINAL | | CROSS-SECTIONAL HEIGHT | 0.293 INCHES MINIMUM AND 0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM0.333 INCHES MAXIMUM | | CROSS-SECTIONAL WIDTH | 0.891 INCHES MINIMUM AND 0.891 INCHES MINIMUM AND 0.985 INCHES MAXIMUM0.985 INCHES MAXIMUM | | FABRICATION METHOD | SOLIDSOLID | | OVERALL LENGTH | 17.500 INCHES MINIMUM AND 17.500 INCHES MINIMUM AND 18.000 INCHES MAXIMUM18.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | STYLE DESIGNATOR | STRIP |
|
|