|
|
|
National Stock Number:
5330-01-113-2925
Federal Supply Class:
5330
National Item Identification Number:
011132925
Description:
SEAL,NONMETALLIC ANGLE
Detail:
AN ITEM FABRICATED FROM NONMETALLIC ANGLE. IT MAY BE (1) FORMED TO A SPECIFIC SHAPE WITH OR WITHOUT JOINTS, (2) A SINGLE PIECE WHOSE ENDS HAVE BEEN SECURED TOGETHER TO FORM A SPECIFIC SHAPE, OR (3) A STRAIGHT ITEM FABRICATED TO A SPECIFIC LENGTH FOR A SPECIFIC APPLICATION WITH END CUTS OR JOINTS. ITEMS EXCEPT FOR MOLDED CORNERS, END CUT(S), AND MOUNTING HOLE(S), SLOT(S), PRESS FIT BUTTONS AND THE LIKE, MUST BE OF ONE CONTINUOUS CROSS SECTION. IT MAY HAVE FABRIC, CORD, OR METAL REINFORCEMENT. IT IS SPECIFICALLY DESIGNED FOR USE IN APPLICATIONS WHERE THERE IS NO RELATIVE MOTION BETWEEN JOINED PARTS. EXCLUDES BUSHING, NONMETALLIC; GASKET; AND PACKING PREFORMED. FOR STRAIGHT ITEMS WITH SQUARE END CUTS AND WITHOUT MOUNTING HOLE(S), SLOT(S), OR PRESS FIT BUTTONS, SEE NONMETALLIC ANGLE.
|
Manufacturer Information:
| L356001145 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | L356001145 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| APERTURE LENGTH | 25.220 INCHES MINIMUM AND 25.220 INCHES MINIMUM AND 25.250 INCHES MAXIMUM25.250 INCHES MAXIMUM | | APERTURE WIDTH | 25.220 INCHES MINIMUM AND 25.220 INCHES MINIMUM AND 25.250 INCHES MAXIMUM25.250 INCHES MAXIMUM | | CONSTRUCTION | SOLIDSOLID | | CROSS-SECTIONAL SHAPE STYLE | L SHAPEL SHAPE | | LEFT FLANGE HEIGHT | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL | | LEFT TIP STYLE | SQUARE ENDSQUARE END | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-2765 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | RIGHT TIP RELATIONSHIP WITH LEFT TIP | IDENTICALIDENTICAL | | RIGHT/BASE FLANGE HEIGHT | 0.380 INCHES NOMINAL0.380 INCHES NOMINAL |
|
|