|
|
|
National Stock Number:
5330-01-064-4105
Federal Supply Class:
5330
National Item Identification Number:
010644105
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 205B713 PIECE 3 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.312 INCHES NOMINAL | | OVERALL LENGTH | 4.312 INCHES NOMINAL | | OVERALL WIDTH | 4.312 INCHES NOMINAL | | APERTURE DIAMETER | 4.000 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.562 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.376 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.376 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.468 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.468 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | CRITICALITY CODE JUSTIFICATION | ZZZY | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 04804 | | DESIGN CONTROL REFERENCE | 205B713 PIECE 3 | | MATERIAL | CELLULOSE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 7540-1 FSCM 04804 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|