|
|
|
National Stock Number:
5330-01-013-5841
Federal Supply Class:
5330
National Item Identification Number:
010135841
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 10-101949-08 | 77820 | AMPHENOL CORP | | 371-8501-000 | 13499 | ROCKWELL COLLINS, INC. | | L8P81 | 09922 | SOURIAU USA, INC. | | 371-8501-000 | 95105 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| 0.604 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.109 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.109 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | TEMP RATING | -65.0 DEG CELSIUS AND | | 125.0 DEG CELSIUS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77820 | | DESIGN CONTROL REFERENCE | 10-101949-08 | | MATERIAL | RUBBER SYNTHETIC OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.016 INCHES MINIMUM AND | | 0.032 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR | | HOLE DIAMETER | 0.130 INCHES NOMINAL | | OVERALL LENGTH | 0.802 INCHES MINIMUM AND | | 0.822 INCHES MAXIMUM | | OVERALL WIDTH | 0.802 INCHES MINIMUM AND | | 0.822 INCHES MAXIMUM | | APERTURE DIAMETER | 0.500 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.109 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.584 INCHES MINIMUM AND | | 0.604 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.584 INCHES MINIMUM AND |
|
|