5330-00-948-9912, SEAL,NONMETALLIC CHANNEL

National Stock Number:
5330-00-948-9912

Federal Supply Class:
5330

National Item Identification Number:
009489912

Description:
SEAL,NONMETALLIC CHANNEL

Detail:
An item fabricated from NONMETALLIC CHANNEL. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes GASKET; GROMMET, NONMETALLIC; and PACKING, PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC CHANNEL.

Manufacturer Information:

205-060-807-081	97499	BELL TEXTRON INC
205-060-807-81	97499	BELL TEXTRON INC

Techincal Specification:

END CUT ANGLE	90.0 DEGREES90.0 DEGREES
CONSTRUCTION	SOLIDSOLID
LEFT INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEFT OUTSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEFT SIDE FLANGE HEIGHT	0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM0.395 INCHES MAXIMUM
LEFT SIDE FLANGE THICKNESS AT WEB	0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM
LEFT SIDE FLANGE THICKNESS	0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM
OVERALL LENGTH	23.510 INCHES NOMINAL23.510 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-36855 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SYNTHETIC OVERALL
RIGHT OUTSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
RIGHT SIDE FLANGE HEIGHT	0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM0.395 INCHES MAXIMUM
RIGHT SIDE FLANGE THICKNESS AT WEB	0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM
RIGHT SIDE FLANGE THICKNESS	0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM
RIGHT INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
WEB THICKNESS	0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM
WEB WIDTH	0.165 INCHES MINIMUM AND 0.165 INCHES MINIMUM AND 0.195 INCHES MAXIMUM0.195 INCHES MAXIMUM

Click here to Register for Free 30-day Trial