|
|
|
National Stock Number:
5330-00-922-1483
Federal Supply Class:
5330
National Item Identification Number:
009221483
Description:
RETAINER,PACKING
Detail:
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.
|
Manufacturer Information:
| A51P40519-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P40519-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51P40519-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 ALLOY 2024 T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CROSS-SECTIONAL HEIGHT | 0.500 INCHES NOMINAL | | OUTER GROOVE WIDTH | 0.197 INCHES NOMINAL | | INNER GROOVE WIDTH | 0.136 INCHES MINIMUM AND | | 0.142 INCHES MAXIMUM | | CENTER HOLE DIAMETER | 0.877 INCHES MINIMUM AND | | 0.880 INCHES MAXIMUM | | PERIPHERAL DIAMETER | 1.688 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 61174 | | DESIGN CONTROL REFERENCE | A51P40519-11 |
|
|