5330-00-883-1334, GASKET

National Stock Number:
5330-00-883-1334

Federal Supply Class:
5330

National Item Identification Number:
008831334

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

11072497

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

APERTURE WIDTH	5.170 INCHES MINIMUM AND 5.230 INCHES MAXIMUM
APERTURE LENGTH	5.170 INCHES MINIMUM AND 5.230 INCHES MAXIMUM
BOLT HOLE QUANTITY	8
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.950 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	5.850 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.031 INCHES NOMINAL
HARDNESS RATING	35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
INSIDE CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OVERALL LENGTH	6.470 INCHES MINIMUM AND 6.530 INCHES MAXIMUM
OVERALL WIDTH	6.470 INCHES MINIMUM AND 6.530 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ZZ-R-765,CL 2B,GR 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SILICONE CLASS Q OVERALL
OUTSIDE CORNER RADIUS	0.300 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.330 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.330 INCHES NOMINAL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial