5330-00-775-5070, GASKET

National Stock Number:
5330-00-775-5070

Federal Supply Class:
5330

National Item Identification Number:
007755070

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

10-150949-20	77068	ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV
10-150949-20	77820	AMPHENOL CORP
10583620-5	18876	U S ARMY AVIATION AND MISSILE COMMAND
8437228-8	19204	ARMY, UNITED STATES DEPARTMENT OF THE
5330007755070	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE

Techincal Specification:

APERTURE DIAMETER	1.250 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.287 INCHES MINIMUM AND 1.307 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.287 INCHES MINIMUM AND 1.307 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.024 INCHES NOMINAL
HARDNESS RATING	55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D2000,2BC615ABE3S2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH	1.662 INCHES MINIMUM AND 1.682 INCHES MAXIMUM
OVERALL WIDTH	1.662 INCHES MINIMUM AND 1.682 INCHES MAXIMUM
MATERIAL	RUBBER CHLOROPRENE CLASS CR OVERALL
OUTSIDE CORNER RADIUS	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.187 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.187 INCHES NOMINAL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial