5330-00-641-1616, GASKET

National Stock Number:
5330-00-641-1616

Federal Supply Class:
5330

National Item Identification Number:
006411616

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

501151	08638	ALLIANT TECHSYSTEMS INC ORDNANCE SYSTEMS DIV
8359010	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Techincal Specification:

APERTURE DIAMETER	1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.047 INCHES NOMINAL
HARDNESS RATING	65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATION	417,SB 715 B,F1 MIL STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH	1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM
OVERALL WIDTH	1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OUTSIDE CORNER RADIUS	0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial