5330-00-508-0753, GASKET

4920-00-508-0758 TEST STAND,HYDRAULIC SYSTEM COMP

National Stock Number:
5330-00-508-0753

Federal Supply Class:
5330

National Item Identification Number:
005080753

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

0740850	S3002	GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
1276-31-108	A0199	FINMECCANICA SPA
8436868-5	19204	ARMY, UNITED STATES DEPARTMENT OF THE
7358504	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
5330PL0811411	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
13207E2941FN122	97403	CECOM LR CENTER
A-A-52481	58536	FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
A52481-6	58536	FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS52000-6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

APERTURE DIAMETER	1.125 INCHES MINIMUM AND 1.141 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.063 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.063 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER	0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
OUTSIDE CORNER RADIUS	0.156 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.157 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.157 INCHES NOMINAL
OVERALL LENGTH	1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
OVERALL WIDTH	1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D2000 2BC815C1E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER CHLOROPRENE CLASS CR OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial