5330-00-330-1126, GASKET

National Stock Number:
5330-00-330-1126

Federal Supply Class:
5330

National Item Identification Number:
003301126

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

388884-4	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
388884PC4	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

APERTURE LENGTH	2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM
APERTURE WIDTH	2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.708 INCHES MINIMUM AND 2.728 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.708 INCHES MINIMUM AND 2.728 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM
HARDNESS RATING	50.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER	0.187 INCHES MINIMUM AND 0.197 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
INSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
INSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM
OVERALL LENGTH	3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM
OVERALL WIDTH	3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER CHLOROPRENE CLASS CR OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial