|
|
|
National Stock Number:
5330-00-297-4893
Federal Supply Class:
5330
National Item Identification Number:
002974893
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 10555039 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 1153740 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ELONGATION PERCENTAGE | 300 MAXIMUM | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND | | 55.0 SHORE DUROMETER A MAXIMUM OVERALL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR | | HOLE DIAMETER | 0.188 INCHES NOMINAL | | OVERALL LENGTH | 7.927 INCHES MINIMUM AND | | 7.947 INCHES MAXIMUM | | OVERALL WIDTH | 1.927 INCHES MINIMUM AND | | 1.947 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.208 INCHES MINIMUM AND | | 0.228 INCHES MAXIMUM | | APERTURE WIDTH | 1.127 INCHES MINIMUM AND | | 1.147 INCHES MAXIMUM | | APERTURE LENGTH | 7.127 INCHES MINIMUM AND | | 7.147 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.490 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.740 INCHES MINIMUM AND | | 3.760 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.209 INCHES MINIMUM AND | | 0.229 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.209 INCHES MINIMUM AND | | 0.229 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 |
|
|