| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
| FASTENER LENGTH | 1.4725 INCHES MINIMUM AND 1.4925 INCHES MAXIMUM |
| GRIP LENGTH | 0.9325 INCHES MINIMUM AND 0.9425 INCHES MAXIMUM |
| HEAD HEIGHT | 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER |
| HEAD MAJOR DIAMETER | 0.490 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 718 OVERALL |
| MINIMUM TENSILE STRENGTH | 210000 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PROTRUDING TENSION HEAD NICKEL BASE ALLOY (INCONEL 718) 1/16" GRIP VARIATION,1/32" OVERSIZE PIN |
| NOMINAL THREAD SIZE | 0.3125 INCHES |
| SHANK DIAMETER | 0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HI-SHEAR SPEC 258 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |