| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 1.175 INCHES MINIMUM AND 1.195 INCHES MAXIMUM |
| GRIP LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| HEAD HEIGHT | 0.0993 INCHES MINIMUM AND 0.1013 INCHES MAXIMUM |
| HEAD MINOR DIAMETER | 0.470 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| LUBRICATION | SOLID FILM OR CETYL ALCOHOL AND DRY FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET,THREADED,TENSION,100 DEGREE C'SUNK HEAD,HEX POINT DRIVE,0.0156 OVERSIZE,CRES (125 KSI FSU) |
| NOMINAL THREAD SIZE | 0.2500 INCHES |
| SHANK DIAMETER | 0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SPECIFICATION/STANDARD DATA | 76301-ST3-813 MANUFACTURERS STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700,METHOD 1 OR 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |