| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.16 INCHES MINIMUM AND 1.20 INCHES MAXIMUM |
| GRIP LENGTH | 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.305 INCHES MAXIMUM |
| LUBRICATION | DRY FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP H11 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,CRIMP,FLUSH SHEAR HEAD |
| NOMINAL THREAD SIZE | 0.19 INCHES |
| SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 156000 SINGLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |