| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| EXPANSION DEVICE | DRIVE STEM-TYPE H |
| FEATURES PROVIDED | SELF-LOCKING |
| GRIP LENGTH | 0.344 INCHES NOMINAL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 6AL-4V PER AMS 4928 OR AMS 4969 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | 6AL-4V PER AMS 4928 OR AMS 4969 ASSN STD SINGLE MATERIAL RESPONSE HEAD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 6AL-4V PER AMS 4928 OR AMS 4969 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | STEEL CORROSION RESISTING SLEEVE |
| MATERIAL | TITANIUM ALLOY BOLT |
| MATERIAL | TITANIUM ALLOY NUT |
| MATERIAL | TITANIUM ALLOY HEAD |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | VISU-LOK, FASTENER, BLIND INTERNALLY THREADED, EXTERNAL SLEEVE , TITANIUM, 100 DEGREE REDUCED FLUSH HEAD, SELF-LOCKING, 75 KSI SHEAR, GROUND SHANK |
| PROPRIETARY CHARACTERISTICS | PACS |
| SHANK DIAMETER | 0.250 INCHES NOMINAL |
| SHANK STYLE | SELF-PLUGGING HIGH CLINCH SHANK |
| SPECIAL FEATURES | HEAT TREATMENT: NUT AND SCREW: PER AMS-H-81200, MAX. HYDROGEN 125; SLEEVE: AS REQUIRED FOR PERFORMANCE; LOCKING FEATURE CONSISTS OF (3) INDENTATIONS LOCATED 130 DEG. APART ON THE PERIPHERY OF THE NUT COMPONENT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | PASSIVATE SLEEVE |