|
|
|
National Stock Number:
5320-01-597-3329
Federal Supply Class:
5320
National Item Identification Number:
015973329
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| HL32PB-8-38 | 06725 | SPS TECHNOLOGIES, LLC | | HL32PB-8-38 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL32PB-8-38 | 17446 | HUCK INTERNATIONAL, INC | | HL32PB-8-38 | 56878 | SPS TECHNOLOGIES, LLC | | HL32PB-8-38 | 60516 | WEST COAST AEROSPACE, INC. | | HL32PB-8-38 | 73197 | HI-SHEAR CORPORATION | | HL32PB-8-38 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL32PB-8-38 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| FASTENER LENGTH | 2.760 INCHES MINIMUM AND 2.780 INCHES MAXIMUM | | GRIP LENGTH | 2.375 INCHES NOMINAL | | HEAD HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | HEAD STYLE | STRAIGHT PAN | | HEAD MAJOR DIAMETER | 0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5628 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.241 INCHES MINIMUM AND 0.244 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYP II, CLS 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | WIDTH BETWEEN FLATS | 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
|
|