| MATERIAL | STEEL COMP 4340 OR |
| STEEL COMP 4140 OR |
| STEEL COMP 8740 BODY |
| STEEL COMP 303 COLLAR |
| ALUMINUM ALLOY 2024 WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE COLLAR |
| QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE WASHER |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE BODY |
| CADMIUM COLLAR |
| ANODIZE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| QQ--P-416, TYPE I, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE COLLAR |
| MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE WASHER |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER |
| HEAD HEIGHT | 0.064 INCHES MINIMUM AND |
| 0.074 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.357 INCHES MINIMUM AND |
| 0.377 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND |
| 100.0 DEGREES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND |
| 0.0806 INCHES MAXIMUM |
| SHANK DIAMETER | 0.1885 INCHES MINIMUM AND |
| 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.437 INCHES NOMINAL |
| COLLAR STYLE | THREADED BREAK OFF TYPE |
| COLLAR OUTSIDE DIAMETER | 0.303 INCHES MINIMUM AND |
| 0.307 INCHES MAXIMUM |
| COLLAR OVERALL HEIGHT | 0.437 INCHES MINIMUM AND |
| 0.457 INCHES MAXIMUM |
| COLLAR INSIDE DIAMETER | 0.192 INCHES MINIMUM AND |
| 0.200 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 32 |
| THREAD DIRECTION | RIGHT-HAND |