| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 1.383 INCHES MAXIMUM |
| GRIP LENGTH | 0.781 INCHES MINIMUM AND 0.845 INCHES MAXIMUM |
| HARDNESS RATING | 326.0 KNOOP MINIMUM AND 466.0 KNOOP MAXIMUM SLEEVE |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.762 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR AMS A286 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE OR AMS 5690 ASSN STD 4TH MATERIAL RESPONSE MECHANICAL LOCK |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1044 OR STEEL COMP 4037 OR STEEL COMP 4130 MECHANICAL LOCK |
| MATERIAL | STEEL SLEEVE |
| MATERIAL | STEEL STEM |
| MINIMUM TENSILE STRENGTH | 7500 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| SHEAR STRENGTH | 12200 SINGLE POUNDS PER SQUARE INCH |
| SPECIFICATION/STANDARD DATA | 96906-MS90353 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ALUMINUM OVERALL |