|
|
|
National Stock Number:
5320-01-424-5747
Federal Supply Class:
5320
National Item Identification Number:
014245747
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 74R320022-2061 | 76301 | THE BOEING COMPANY | | 74R320022-2061 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER | | HEAD HEIGHT | 0.0620 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.3303 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.538 INCHES MINIMUM AND | | 0.558 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND | | 0.0806 INCHES MAXIMUM | | SHANK DIAMETER | 0.2177 INCHES MINIMUM AND | | 0.2182 INCHES MAXIMUM | | GRIP LENGTH | 0.193 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | LUBRICATION | SOLID FILM OR | | DRY FILM AND | | CETYL ALCOHOL | | SPECIAL FEATURES | PIN IS SAME AS ST3M809-3-3, EXCEPT THERE IS A 0.070 DIA HOLE DRILLED THRU THREADED END, 0.111/0.121 FROM END. |
|
|