| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| GRIP LENGTH | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.3765 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OVERALL |
| IDENTIFICATION CODE COLOR | NATURAL |
| LUBRICATION | CETYL ALCOHOL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| MINIMUM TENSILE STRENGTH | 1640 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SHEAR STRENGTH | 2540 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | DESIDNED FOR USE IN APPLICATIONS WHERE FIBERGLASS E-GLASS OR KEVLAR SOLID LAMINATE ASSEMBLIES ARE ATTACHED TO ALUMINUM SUBSTRUCTURE. RESTRICTED FROM USE IN SOLID METALLIC JOINTS OR PRIMARY LOAD CARRYING STRUCTURE. |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 88277-3D0086 MANUFACTURERS STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |