|
|
|
National Stock Number:
5320-01-324-4228
Federal Supply Class:
5320
National Item Identification Number:
013244228
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| TL511-4-13 | 06725 | SPS TECHNOLOGIES, LLC | | TL511-4-13 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TL511-4-13 | 17446 | HUCK INTERNATIONAL, INC | | TL511-4-13 | 27624 | SPS TECHNOLOGIES LLC | | TL511-4-13 | 59563 | REID PRODUCTS INC. | | TL511-4-13 | 60516 | WEST COAST AEROSPACE, INC. | | TL511-4-13 | 80539 | SPS TECHNOLOGIES, LLC | | TL511-4-13 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TL511-4-13 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.135 INCHES MINIMUM AND 1.160 INCHES MAXIMUM | | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.439 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OR STEEL COMP 4340 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2859 INCHES NOMINAL | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | SPECIAL FEATURES | HEAD RECESS,0.1255 IN. MIN,0.1275 IN. MAX BTWN FLATS,HEX. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 | | TIP DIAMETER | 0.2721 INCHES NOMINAL |
|
|