|
|
|
National Stock Number:
5320-01-285-7756
Federal Supply Class:
5320
National Item Identification Number:
012857756
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 209F586-117 | 05606 | GENERAL DYNAMICS-OTS, INC. | | HL19TF-6-15 | 56878 | SPS TECHNOLOGIES, LLC | | HL19TF-6-16 | 06725 | SPS TECHNOLOGIES, LLC | | HL19TF-6-16 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL19TF-6-16 | 56878 | SPS TECHNOLOGIES, LLC | | HL19TF-6-15 | 73197 | HI-SHEAR CORPORATION | | HL19TF-6-16 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HL19TF-6-16 | 60516 | WEST COAST AEROSPACE, INC. | | HL19TF-6-16 | 73197 | HI-SHEAR CORPORATION | | HL19TF-6-16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL19TF-6-16 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP E4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAT TREATMENT | TEMPERED OVERALL | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.2966 INCHES MINIMUM AND | | 0.3016 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.5650 INCHES MINIMUM AND | | 0.5850 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.07910 INCHES MINIMUM AND | | 0.08060 INCHES MAXIMUM | | SHANK DIAMETER | 0.1885 INCHES MINIMUM AND | | 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.255 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 32 | | THREAD DIRECTION | RIGHT-HAND | | LUBRICATION | SOLID FILM |
|
|