| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| GRIP LENGTH | 0.750 INCHES MAXIMUM |
| HARDNESS RATING | 44.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.1465 INCHES NOMINAL |
| HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER |
| HEAD MAJOR DIAMETER | 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND DRY FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| MINIMUM TENSILE STRENGTH | 210000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| SHANK DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SPECIAL FEATURES | 6-32UNJC-3B THREAD SIZE ALONG THE LONGITUDINAL AXIS FROM THE HEAD END; 0.120 IN. SLOT LENGTH,0.060 IN. SLOT WIDTH LOCATED ON SHANK NEAR HEAD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |