|
|
|
National Stock Number:
5320-01-118-0923
Federal Supply Class:
5320
National Item Identification Number:
011180923
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| GF511H4-7 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | X-1SP100-EU09-07 | 17446 | HUCK INTERNATIONAL, INC | | XISP100-EU09-07 | 17446 | HUCK INTERNATIONAL, INC | | X-1SP100-EU09-07 | 29666 | HUCK MFG CO |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM | | GRIP LENGTH | 0.376 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.426 INCHES MAXIMUM | | LUBRICATION | DRY FILM | | MATERIAL | IRON ALLOY 660 SLEEVE | | MATERIAL | STEEL COMP 8740 STEM | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | SHANK DIAMETER | 0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE | | SURFACE TREATMENT | PASSIVATE SLEEVE |
|
|