|
|
|
National Stock Number:
5320-01-092-5544
Federal Supply Class:
5320
National Item Identification Number:
010925544
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| TLD976-5-17E-64 | 17446 | HUCK INTERNATIONAL, INC | | TLD976-5-17E-64 | 27624 | SPS TECHNOLOGIES LLC | | TLD976-5-17E-64 | 56878 | SPS TECHNOLOGIES, LLC | | TLD976-5-17E-64 | 59563 | REID PRODUCTS INC. | | TLD976-5-17E-64 | 80539 | SPS TECHNOLOGIES, LLC | | TLD976-5-17E-64 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TLD976-5-17E-64 | 97928 | HUCK INTL INC | | TLD976-5-17E-64 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.552 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | FASTENER LENGTH | 1.458 INCHES MINIMUM AND | | 1.483 INCHES MAXIMUM | | SHANK DIAMETER | 0.3833 INCHES NOMINAL | | TIP DIAMETER | 0.3645 INCHES NOMINAL | | GRIP LENGTH | 1.052 INCHES MINIMUM AND | | 1.067 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 24 | | THREAD DIRECTION | RIGHT-HAND | | LUBRICATION | DRY FILM AND | | CETYL ALCOHOL | | SPECIAL FEATURES | 8-32UNJC-3B THREAD SIZE,0.760 IN. LENGTH OF THREADS ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LENGTH,0.060 IN. SLOT WIDTH LOCATED 0.700 IN. FROM TOP OF HEAD TO CENTER OF SLOT | | CRITICALITY CODE JUSTIFICATION | FEAT | | THE MANUFACTURERS DATA | | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | MANUFACTURERS CODE | 17446 | | DESIGN CONTROL REFERENCE | TLD976-5-17E-64 |
|
|