|
|
|
National Stock Number:
5320-01-075-0755
Federal Supply Class:
5320
National Item Identification Number:
010750755
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| TLD956-5-12E51 | 17446 | HUCK INTERNATIONAL, INC | | TLD956-5-12E51 | 27624 | SPS TECHNOLOGIES LLC | | TLD956-5-12E51 | 56878 | SPS TECHNOLOGIES, LLC | | TLD956-5-12E51 | 59563 | REID PRODUCTS INC. | | TLD956-5-12E51 | 80539 | SPS TECHNOLOGIES, LLC | | TLD956-5-12E51 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TLD956-5-12E51 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.522 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | FASTENER LENGTH | 1.121 INCHES MINIMUM AND | | 1.146 INCHES MAXIMUM | | SHANK DIAMETER | 0.3547 INCHES NOMINAL | | TIP DIAMETER | 0.3423 INCHES NOMINAL | | GRIP LENGTH | 0.740 INCHES MINIMUM AND | | 0.755 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.3125 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 24 | | THREAD DIRECTION | RIGHT-HAND | | LUBRICATION | DRY FILM AND | | CETYL ALCOHOL | | SPECIAL FEATURES | 8-32UNJC-3B THREAD SIZE,0.630 IN. LG ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.570 IN. FROM TOP OF HEAD TO CENTER OF SLOT |
|
|