|
|
|
National Stock Number:
5320-01-068-5545
Federal Supply Class:
5320
National Item Identification Number:
010685545
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 100-048-6-13 | 97499 | BELL TEXTRON INC | | 7HL20PB6-13 | K3871 | WILSON BROS LEEDS LTD | | BACB30MB6-13 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GB511E-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | BACB30MB6-13 | 77272 | THE BOEING COMPANY | | BACB30MB6-13 | 81205 | THE BOEING COMPANY | | HL1050PB-6-13 | 06725 | SPS TECHNOLOGIES, LLC | | HL1050PB-6-13 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL1050PB-6-13 | 17446 | HUCK INTERNATIONAL, INC | | GB511E3-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL1050PB-6-13 | 56878 | SPS TECHNOLOGIES, LLC | | HL1050PB-6-13 | 60516 | WEST COAST AEROSPACE, INC. | | HL1050PB-6-13 | 73197 | HI-SHEAR CORPORATION | | HL1050PB-6-13 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | HL20PB-6-13 | 06725 | SPS TECHNOLOGIES, LLC | | HL20PB-6-13 | 17446 | HUCK INTERNATIONAL, INC | | HL20PB-6-13 | 56878 | SPS TECHNOLOGIES, LLC | | HL20PB-6-13 | 60512 | K R D CO | | HL20PB-6-13 | 60516 | WEST COAST AEROSPACE, INC. | | HL20PB-6-13 | 73197 | HI-SHEAR CORPORATION | | HS5603-6-13 | 8V613 | THE BOEING COMPANY | | HL20PB-6-13 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL20PB-6-13 | 97928 | HUCK INTL INC | | HL20PB-6-13 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | QD3255-01-06-13 | K6539 | PALL EUROPE LIMITED AEROSPACE DIVISION | | QQ40007 | K6539 | PALL EUROPE LIMITED AEROSPACE DIVISION |
|
Techincal Specification:
| COLLAR STYLE | STRAIGHT TYPE | | FASTENER LENGTH | 1.127 INCHES MINIMUM AND 1.147 INCHES MAXIMUM | | GRIP LENGTH | 0.817 INCHES MAXIMUM | | HEAD HEIGHT | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|