|
|
|
National Stock Number:
5320-01-046-0391
Federal Supply Class:
5320
National Item Identification Number:
010460391
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 0SB100-T06-04 | 0HDW7 | HUCK INTERNATIONAL, INC. | | 0SB100-T06-4 | 80539 | SPS TECHNOLOGIES, LLC | | 0SB100T06-04 | 0HDW7 | HUCK INTERNATIONAL, INC. | | 0SB100T06-04 | 17446 | HUCK INTERNATIONAL, INC | | 0SB100-T6-4 | 17446 | HUCK INTERNATIONAL, INC | | 0SB100T06-04 | F6167 | HUCK | | OSB100-T06-4 | 0HDW7 | HUCK INTERNATIONAL, INC. | | CR7340S06-04 | 11815 | SPS TECHNOLOGIES, LLC | | OSB100-T06-04 | 29666 | HUCK MFG CO | | 0SB100T6-4 | 29666 | HUCK MFG CO | | C9502-06-4 | 80539 | SPS TECHNOLOGIES, LLC | | C9502-06-4 | 81755 | LOCKHEED MARTIN CORPORATION | | 5320PL2174319 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.428 INCHES NOMINAL | | GRIP LENGTH | 0.219 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | HEAD HEIGHT | 0.074 INCHES NOMINAL | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.386 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8740 MFR REF SINGLE MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4027 MFR REF SINGLE MATERIAL RESPONSE OR AISI 4037 MFR REF SINGLE MATERIAL RESPONSE HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4027 MFR REF SINGLE MATERIAL RESPONSE OR AISI 4037 MFR REF SINGLE MATERIAL RESPONSE SLEEVE | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 2100 POUNDS PER SQUARE INCH | | SHANK DIAMETER | 0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-81177 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|