|
|
|
National Stock Number:
5320-01-004-4221
Federal Supply Class:
5320
National Item Identification Number:
010044221
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| ST3M691A905422 | 76301 | THE BOEING COMPANY | | TL842-9054-22 | 17446 | HUCK INTERNATIONAL, INC | | TL842-9054-22 | 27624 | SPS TECHNOLOGIES LLC | | TL842-9054-22 | 56878 | SPS TECHNOLOGIES, LLC | | TL842-9054-22 | 59563 | REID PRODUCTS INC. | | TL842-9054-22 | 80539 | SPS TECHNOLOGIES, LLC | | TL842-9054-22 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TL842-9054-22 | 97928 | HUCK INTL INC | | TL842-9054-22 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 2.078 INCHES NOMINAL | | GRIP LENGTH | 1.375 INCHES NOMINAL | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 1.195 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.562 INCHES | | SPECIAL FEATURES | 0.5608 IN. O/A DIA | | SHANK DIAMETER | 0.6225 INCHES NOMINAL | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | TIP DIAMETER | 0.5974 INCHES NOMINAL |
|
|