|
|
|
National Stock Number:
5320-00-959-0194
Federal Supply Class:
5320
National Item Identification Number:
009590194
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 5320PL0810760 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | GB510B08 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510B08-8 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL19PB-5-8 | 56878 | SPS TECHNOLOGIES, LLC | | HL19PB-5-8 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HL19PB-5-8 | 60516 | WEST COAST AEROSPACE, INC. | | R2232P5-8 | 23991 | LOCKHEED MARTIN CORPORATION | | HL19PB-5-8 | 73197 | HI-SHEAR CORPORATION | | HS5605-5-8 | 8V613 | THE BOEING COMPANY | | HL19PB5-8 | AC910 | AERTEKNO S.R.L. | | HL19PB-5-8 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | HL19PB-5-8 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | HL19PB-5-8 | R1120 | SATAIR A/S |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM | | GRIP LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.2564 INCHES MINIMUM AND 0.2612 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 160 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.164 INCHES | | SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0801 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJC |
|
|